Welcome to Lizard Lick Amusements!
home
arcade machines
payment info
restoration process
eBay auctions

arcade parts
shipping info
hall of fame
links
 
 
Electrohome G07 3 Amp Pig Tail Fuses 5-Pack  

Electrohome G07 3 Amp Pig Tail Fuses 5-Pack

Nothing will make you madder than blowing one of these fuses, and then not having one to solder back on to your G07 chassis, so why not have a few spares lying around?

$2.50/5-pack


Electrohome G07 Beam Limiter Transistor 2SA673  

Electrohome G07 Beam Limiter & Video Amplifier 2SA673

TO-92 Package; Used at X303 for brightness issues and at X102, X104 & X106 for color issues.

$.95/each


Electrohome G07 Cap Kit, for 19" monitors

 

Electrohome G07 Cap Kit, for 19" monitors

Replacing the caps on your monitor's chassis board can get rid of many problems: jailbars, curves, etc. Includes a copy of our Checklist to help you keep track of the caps that you've replaced, and a link to our own "map" of the G07 chassis to aid in locating the caps to be replaced.

$9.95


Electrohome G07 Flyback, for 19" monitors

 

Electrohome G07 Flyback, for 19" monitors A29951-B

Here's the mother of all G07 repairs, getting rid of that blown-up Flyback with the big crack on the side of it. Replacing this and the HOT go pretty much hand-in-hand.

$24.95 *SALE* $19.95


Electrohome G07 H.O.T. 2SD870  

Electrohome G07 Horizontal Output Transistor 2SD870

TO-3 Package; Used at X01. Better known as the "HOT"... If you're replacing your flyback, you might as well go ahead and replace this as well... this will take care of a few problems with your chassis, if you're following the troubleshooting flowchart, you'll know when you need this.

$4.95


Electrohome G07 Horizontal Width Coil, for 19" monitors

 

Electrohome G07 Horizontal Width Coil, for 19" monitors

These things get old and brittle, when it disinegrates as you attempt to adjust it, it's probably time for a new one. Most of the old ones will be broken from supporting the board as repairs are done, so we generally replace this part last...

$9.95


Electrohome G07 Power Drive Transistor 2SC2688  

Electrohome G07 Power Driver Transistor 2SC2688

TO-126 Package; Used at X901 for power supply & B+ voltage problems.

$1.95/each


Electrohome G07 Power Regulator Transistor 2SC1106  

Electrohome G07 Power Regulator Transistor 2SC1106

TO-3 Package; Used at X02 for power supply & B+ voltage problems, also when measuring 0 ohms from the transistor case to the chassis.

$5.95


Electrohome G07 Vertical Drive Transistor 2SD478  

Electrohome G07 Vertical Output Transistor 2SD478

TO-220 Package; Used at X401 & X402 for vertical size issues.

$1.95/each


Electrohome G07 Video Output Transistor 2SC2611  

Electrohome G07 Video Output Transistor 2SC2611

TO-126 Package; Used on the neckboard at X101, X102 & X103 for color issues.

$1.95/each


Molex 2-Pin Female Power Connector
 

Molex 2-Pin Female Power Connector

Replace your missing or worn out power connector on your monitor chassis with a brand new one. .093 centers. Includes pins.

$2.95


Molex 2-Pin Male Power Connector
 

Molex 2-Pin Male Power Connector

Replace your missing or worn out power connector to your monitor chassis with a brand new one. .093 centers. Includes pins.

$2.95


Nintendo/Sanyo 20 EZ Cap Kit

 

Nintendo/Sanyo 20 EZ Series Cap Kit

Replacing the caps on your monitor's chassis board can get rid of many problems: jailbars, curves, etc. Includes a copy of our Checklist to help you keep track of the caps that you've replaced.

$9.95


WG K7000 Cap Kit

 

Wells-Gardner K7000 Series Cap Kit

Replacing the caps on your monitor's chassis board can get rid of many problems: jailbars, curves, etc. Includes a copy of our Checklist to help you keep track of the caps that you've replaced.

$9.95

 

Web page design: © 2004-2008 Lizard Lick Amusements | Site last updated: 7/21/08

 
You are visitor
Google     www Lizard Lick Amusements